Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PCM2046 | Weak, blurred image and bluish screen. | R808 [12k/ 3w] aberto. | Altevir lima [Valpaaríso Eletrônica- Ananindeua/ PA] | |
| PHILCO | TPF2130 | Turns on and the upper part appears red and turns off, if you increase scrin it turns off. | R 833 do rgb. | Tec Center | |
| PHILCO | PCM-1451 | Blinking led | Um capacitor c914 | Replace everything for the same | lucie angelo |
| PHILCO | PCS2956 | The television does not turn on the VCC voltage of the CI 901, oscillating between 10 and 14 volts. | The capacitor c921 was burnt, I checked it and everything came back normal. | quebra galo do 500 | |
| PHILCO | 1444 | Be burning offback | Burning the flyback | enoque | |
| PHILCO ITAUTEC | PCS2700 | Weak blinking LED, doesn't turn on and ticks, ticks, ticks at the power supply | White r913 next to the flyback with cold solder or poor contact | Ressolde-o | tiago_9187 |
| PHILCO | TP 2054 | Image swinging or waddling. +b varying. | Change the power supply ci (tda 16846) | Ademar Videira SC | |
| PHILCO | PH21SS | Weapon power supply goes up to 110v and returns to 0 | +b reference return from power supply r552 or r554, just change it and it works normally again | Reinaldo Intel Tec Eletrônica | |
| PHILCO | PCS2976S | On the screen only retractions and sound | R-709 open on 50 volt line | Just replace it (that's the right tip) | PAULO SERTEL ITARARÉ SP |
| PHILCO | PCS2976S | On the screen only retractions and sound | R-709 open on 50 volt line | Just replace it (that's the right tip) | PAULO SERTEL ITARARÉ SP |
| PHILCO | PCS2976S | On the screen only retractions and sound | R-709 open on 50 volt line | Just replace it (that's the right tip) | PAULO SERTEL ITARARÉ SP |
| PHILCO | PCS2976S | Turn on and off | C-805 10x250v defective | Just replace the same | PAULO SERTEL ITARARÉ SP |
| PHILCO | TPF29S4F | Closed horizontally, cushion effect | Power supply r1701, 10r open | Credit to technician gilsom | Lino Bugatty |
| PHILCO | TVPH21M | Vertical closed from the middle of the screen down | Diode that makes the negative voltage for the vertical output | edezio eletronica | |
| PHILCO | PH21D | Image with a retrace line at the top and a strong line in the middle in a vertical direction | D301 | Replace without testing | carlos eletronica carlos |
| PHILCO | TP2053S | Power supply pulsing, stand by led oscillating and does not turn on burning r 917 2.2k | If the resistor is already charred, replace it. and check the secondary diodes. Probably one of them has a cold solder, causing the resistor to heat up and the power supply to become unstable. | Check the diodes of the secondary. mainly the d908. | DEBIQUE |
| PHILCO | TP-1452 | Níoliga, speaker making knock-knock | Ferrite from the power supply transformer away, just join and glue | HP ELETRONICA | |
| PHILCO | TVPH21SS | I'm sound | Problem do not mute | Transistor connected to pin 6 of the amplifier ci mute | lou |
| PHILCO | TP-1454 | Low supply on secondary, around 70v on +b | C934 - 2n2(smd) | ronimc | |
| PHILCO | TP-1454 | Turns on whenever it wants (standby LED remains off when it doesn't turn on) | R913 - 33k | ronimc |