Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | TV2054 | The TV didn't turn on, it just kept banging on the speaker, if you removed the speaker socket from the board it turned on but the image didn't open completely and was slightly moved downwards. | When checking the primary and secondary power supply I found the main transformer with the magnets displaced or loose | I put the magnet back in and locked it with insulating tape and the TV started working normally again. | heliomar tecnico em governador valadares 33-30842033 |
PHILCO | TP29C21 MS032 | Without vertical, after resolder ci activates protection | Although it glowed with normal vertical before going out again, the +44v was at 24v | Replace o ci ic601 tda8177f | jasvan souza |
PHILCO | PCS-2976S | When it gets hot, the picture increases and decreases, and it turns off and on quickly and remains normal. this several times. the +b voltage varies even if this symptom occurs. | R724 (10k) abl aberta. | joaomvjr | |
PHILCO | PCS 3300 | Dark side stripe and little shine | Change without testing electrolytic capacitors 4.7mf x 250volts position c 853 and c 733 | eletronica valeça | |
PHILCO | TP2054 | Vertical doesn't even open, changed all the capacitors in this stage, output ci, ceramic c614 that bothers and ci does everything, nothing solved | Ci voltage regulator 7809 with 1 volt less on the output pin, | Replace and go for the hug | EDGAR THIZ |
PHILCO | PCS2956 | Locked without remote and panel controls | Toc keys with a lot of leakage | Replace of the 5 keys...adapt as tsound are no ones to buy. use a 4-legged standing leg. | Gersongn |
PHILCO | TV- PH21C | The LED does not turn on. | Go 01 closing short 5v. | I replaced IR 01 and everything worked normally. | COMPUHELP |
PHILCO | PCS2976 | No image with sound | Cause: leaky diode 602 | klein | |
PHILCO | PC1443 | On and off continuously and without characters. | 100k r713 in micro open protection line | Replace and go out for a hug | celinvds |
PHILCO | PH200N XX | The red LED doesn't even light up | Sale | Substitute o ic tda 7265 | toninho da eletronica |
PHILCO | TV PH29 CHINA | Screen lights up with a black bar on the right side of the screen varying in size, occasionally serrated and turns off | Replace c450 680pf/2kv (blue) connected to the horz output collector. (blown) | JARBAS ALVES | |
PHILCO | TPF2130 | Sometimes it calls, other times it doesn't | D907- r-931 | I fixed it and it was ok | ELETRONNICA AL. RAI.. |
PHILCO | TPF-2130 | When you turn on the relay it keeps knocking | D-907 solve | ||
PHILCO | MSP211N | Does not turn on, LED is off | Ic301 ams1117 3.3v regulator | ||
PHILCO | PCS2952-PCS2700 | No secondary power supplys | Power supply protection activated | Remove q904 for testing, if it works check the +120v, the 30v zd901, the c918 | jasvan souza |
PHILCO | PT-1454 | Horizontal dark band near the left side around 3cm. | 10k x 1/4w r712 open. | To replace | This email address is being protected from spambots. You need JavaScript enabled to view it. (ELETRÔNICA MODELO) |
PHILCO | PCR-2049 | Image flickering, cannot adjust screen | C721 10/50v | Replace without measuring | MB ELETRÔNICA |
PHILCO | PH29USA2 | No image with retraction lines from the middle to the top | Cold solder no vd564 diode | And I'm resoldering and ready | ELETRONICA AUTO TREVO |
PHILCO | 2052N | Tv image a bit dark and flickering | Crista x503 and just take an older philco board and put it | MARCIORVGO | |
PHILCO | PCS 2700 | Replace without testing and run for the hug!!! | Bf 423 on the fly back side + 10uf x 50volt capacitor in front of the bf, if you remove the scr from the board the TV even works but is left without protection. | Replace without testing and run for the hug!!! | EDGAR THIZ |