Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | PCS 2952 | Image missing from sides | R 2914 (10r 1watts) | Perto do f.back | This email address is being protected from spambots. You need JavaScript enabled to view it. |
PHILCO | TP 2010 53V | When cold the power supply does not work | Power supply | Airton rodrigues | |
PHILCO | PCM 2046 | Turns on, white screen flashes with no image | R - 715(4,7r) r - 708 (47r) | Replace the same | BARRETO CRUZ |
PHILCO | PH21SS | TV with the vertical closing with half screen, with the image shrunken. | The cause was that the vd564 and vd566 diodes were replaced without testing and the TV returned to normal. | ELETRÔNICA MELO BOA VIAGEM -CEARA | |
PHILCO | TV PH14D | Does not turn on intermittent, low supply | R839 (or r839 + r839a) of 82k and photocoupler | Baguatech | |
PHILCO | TV PH 21SS | Turns on the stand by LED and goes into protection | 150k r554 and 100k r552 | Replace | Mauro Mascarenha Parazinho - Ce |
PHILCO | PSC 2976S | Without image, with characters with sound, off | D 602 shorted, r 725 100k open | Replace of both | nonato |
PHILCO | PCM2046 | No characters | R614 390r open | Replacelo | antonio nobrega patos pb |
PHILCO | PCS-2976S | Doesn't start | Smd capacitor 907 and 917 connected to pin 2 di ic 901 | robson | |
PHILCO | PCM2051 | LED flashing with +b normal and fly back works by varying voltages without image filming off | Fly back | Replace o fly back | KAIO |
PHILCO | PH14E | Low power supply with hum | Ic 201 short | ELTON CASTRO - CABO -PE | |
PHILCO | PCS3320N CPO1LR02 | Does not turn on, three horiz output shorted for the second time | The osc horiz pulse died in q703 | Remove hot glue that fixes the electrolytic next to the q703, and that also affects it | jasvan souza |
PHILCO | TP 1452N | Only tunes channels after a few minutes of switching on and tuning out | After checking the seletronic power supply and its signals, checking that everything is ok, I went to the memory which I changed and nothing, so next to replacing the ic 501, I changed the mf 201 filter and it solved the problem | Replace the mf 201 filter | moroni eletronica |
PHILCO | PCR2049 CPH06 | Turning off the screen, sometimes it comes back when touching the screen | Change r 812, 822 and 832 (smd) 330r, connected to the emitters of the transistors, better to put 1/8w. common | reinaldo almeida | |
PHILCO | PH21MSS | Does not leave st. by. | Change capacitors, c226 (1x50), c203 (10x50) on pins 2 and 33 of the ci | reinaldo almeida | |
PHILCO | MCP 1451 R715 | With sound and characters and without image | Resistor de 47k | Replace the 47k resistor | NEY |
PHILCO | PH29 US A2 | TV turns on after 1 or 2 minutes it starts to stretch vertically it turns black and white a retrace line appears and turns off | Change v 502 c2383 without measuring as it can deceive the multimeter | dj nilton | |
PHILCO | PH21A | This TV came with some fine lines in the middle of the tube and the tube was stained | The problem with the lines was the vertical ci, I just went to change the TV, it was ok, but I still had the problem of stains to remove. I took a part of a hair cutting machine that was broken and I did it as if it were a demagnetizer and put it wsound the stains disappeared. and it was resolved, it was beautiful, I just left for a hug | Beto 17/5/2013 | |
PHILCO | TPF2130 | LED on, power supply ok but not turning on | Pin 1 of ic 905 was at 0v | C918 1000/16v defective, replace | jasvan souza |
PHILCO | TV PH21US | Standby LED is on but won't turn on | Transistor v502 | And just replace | ELETRONICA AUTO TREVO |