Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4741
Results: 4741
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | TP2052N | It takes a long time for the image to appear | Profit | Renew it | Paulo Sertel Itararé SP |
| PHILCO | TV EMOTION 1445 | No rf frequency | Time of use or voltage variation | L=001 open I replaced it and a hug | ELETRONICA MEDEIROS |
| PHILCO | PC-2041 | At leak under the plate | Flyback, after changing flyback tv turns off after 30 seconds | Replace r723. After changing the image, it became opaque as if it had no open r722 contrast. | Osires |
| PHILCO | PC-2041 | At leak, under the plate | Flyback, after changing flyback tv turns off after 30 seconds | Replace r722 and | Osires |
| PHILCO | PCM2146 | Does not tune channels | Ceramic capacitor c133 com fuga | Replace the same | eletronica reis |
| PHILCO | PT-2052 | Does not turn on blinking LED is a sign of oscillation and goes into protection@@@ | Cap 6n8x1k6 | Help yourself, leave your tip ass. arni | EETRONICA ARNI-L. LEAL- SC |
| PHILCO | PCM 1451 | Dark screen with back lines | Resolves the cobos do cinescopco. | doglas mota | |
| PHILCO | PCS 2976 | Burning q701 | R721 smd 100r aberto | Replace r 721 | juci |
| PHILCO | TP-2010 | Stand by on, when you touch power, the LED turns off and then lights up. | Cold solder not resistor r-936, resolde-o, fica ok. | Cláudio Ribeiro, TECNOSAT ELETRÔNICA E INFORMÁTICA, JATAÍ-GO, This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| PHILCO | TP-1454 | No image through the antenna, screen a bit dark. normal av. | Sf201 short (fi input coming from varicap) | Manoel (Noca) | |
| PHILCO | TP-2054 | No image, sound ok and osd ok. | D602 (1n4531) shorted | Manoel (Noca) | |
| PHILCO | PH14D | Stand-by LED is off, TV does not turn on. | Resistor r839(82k) changed, r881a(82r) open, transistor q881(2n5551) shorted. | Replace them all, in place of the q881 you can put mpsa42. | jheliocavalcanti |
| PHILCO | TP-1454 | Vertical closed from the middle to the bottom. | D909,r910 and r912 | Dudi | |
| PHILCO | PH 21 US A1 | TV with LED on but does not generate | R 466 of 27k open this resist is connected to pin 8 ehto of IC ttda11145/tda 12165. | DANIEL | |
| PHILCO | PCS - 2952 | Green image. | Solution: adjust the fly screen. | BARRETO CRUZ | |
| PHILCO | TP2050 | It didn't pick up the channel on the AV, it worked normally. | Q-301 aberto (smd) e r-303 (smd) | Replace for the same as the original | ELETRONICA CAVALCANTE MARTINOPOLE-CE |
| PHILCO BRITANIA | PHT 660 | Doesn't start | +5v power supply with load of approximately 2.6v | Cold welding on l1 | |
| PHILCO | TPW3280 | Works normally but when changing functions the av turns off | C 708 5n6 with low capacitance 3n5 | Lima | |
| PHILCO | TPF 2940 BL29 | Does not tune the loud channels | Varicap in os 33volt | Replace d 202 zener 33v | luiztvsom |
| PHILCO | TP2054 | Everything works but dull | Vertical protection | D 602 with small leak | joansa eletronica |