Sony TV Repair: Common Faults and Solutions.
Search: Sony
Results: 20067
Results: 20067
Sony Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| SONY | CDP302 | Intermittent play | Intermittent play, skips forward, backward, etc. | ||
| SONY | TTS81 | Missing part number for motor pulley | We need the p/n for motor pulley on tts-81. see page 23 ofthe manual. -hq comments: the motor pulley is a part of the motor assy (dne-3002a).the part number is a-4608-151-a. | ||
| SONY | KV5000 | Video detector assembly part number | Video detector diode (d201) is enclosed in a can with r270and c225. servicer claims that he cannot disassemble the can and wantsto know if part number for the assembly is available. -hq comments: there should be no problem with disassembling the can an | ||
| SONY | WMF8 | Part number for new style motor | Old version wm-f8 (as in service manual) uses separate servoamp and motor. new version uses a motor with servo amp mounted on it.the old motor is type dnr6900a, p/n 8-835-105-01. new motor assembly istype dnr5700a. we need the correct p/n for this mot | ||
| SONY | CFS580 | Missing part number for lever, panel button | We need the part number for lever, panel button on page 33 ofthe manual. -hq comments: sorry, the part is no longer available. | ||
| SONY | KV25XBR | Distorted right channel audio, replaced ic1108 | Distorted audio, right channel only. | ||
| SONY | CDP302 | Mistracking | Mistracks towards end of disc. in addition to alignment,q203 was found to be leaky. also, helpful to repeat tracking alignmentwith number of discs to find medium. -hq comments: when the tracking gain adj. is realigned to several discs,please make sure | ||
| SONY | WMD6C | Irregular speed | Set starts with slightly higher speed than normal. after 3-5minutes, speed changes up and down every 1-2 records. the set came backafter about one week, motor will not stop, and speed was about four timesfaster. | ||
| SONY | D5A | No disc rotation | Screw was broken and the screw head stopped the disc motor. | ||
| SONY | PSX45 | Intermittent motor movement | Intermittently motor would go and stop. | ||
| SONY | KV1357R | Signal drift on channels 4 and 5 only, solder splash q101 | After set was on about 4 to 5 hours, the signal would drifton channels 4 and 5 only, ie, severely mis-tuned. i noticed a soldersplash between gate and power supply leads of q-101. when the short wasremoved, we lost channels 4 and 5 completely. all other sta | ||
| SONY | FD40A | Raster distortion when moved within any magnetic field | When unit is moved, distortion occurs in raster, ie, bottom ofthe screen will bend causing distortion in scan lines and the raster willexpand and contract causing a change in size. -hq comments: the symptom you are describing is common to all crts. iti | ||
| SONY | KV2670R | Different ic301, see s/b ctv0236 and tvp0025 | Ic301 in actual set is not the same as in the service manual.manual and schematic say ic301 is a cx-20129. same units actually use acx-20193. these parts are not interchangeable. p/n for cx-20129 is 8-752-012-91 p/n for cx-20193 is | ||
| SONY | CDP302 | No display | Machine functioned normally with the exception of having nodisplay. checked filament voltage and inputs and outputs to displaydrive chip and found no problems. | ||
| SONY | KV25XBR | Dead | Unit was dead. no functions. traced problem to shortedd1657 (pin damper diode). | ||
| SONY | KV25XBR | No sound | No audio output. traced problem to ic1107 on the x board.this is the second report i know of this problem. | ||
| SONY | BMC110 | Distorted playback picture | Recording played back showed distorted picture only filling1/5 of the left side of screen. a white spot was in the center when theiris was opened up. | ||
| SONY | SL5000 | Can | Sometimes ejects tape when play is pushed. ant sel in wouldchange logic when button pushed but that the output stayed high. changingmicroprocessor produced no change. pins 30, 31 and 29 all were high.unsoldering these pins allowed the program select t | ||
| SONY | STRV55 | No tuner or memory | No tuner output or memory functions. tuning voltage to tunerremained at 30v regardless of frequency indication on display.external dc on tuning line resulted in good reception. dc on ic402were wrong for pins 2, 3, 8 and 14, 15. replacing ic401, ic402, | ||
| SONY | SL2400 | Spurious threading at turn on | Unit would attempt to thread tape immediately at turn on,even without a tape inserted or loaded. problem was intermittent. |