PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14168
Results: 14168
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 14PT3131 | When plugging into the socket, the fuse blows | D6500 d6502 c2502 and r3527 of 2k2 all opened replaced the TV worked normally | ||
PHILIPS | 50PUG6700/78 | Does not turn on, STBY LED is off | Open inductor FB710 caused by short in capacitor C720 on main PCB | I replaced the inductor and removed the capacitor | Ederlin |
PHILIPS | AZ391 | Am and fm do not tune | Cap c502 with leak along with tuning potentiometer. | Cap 502 smd 220k | guinga sdia goias |
PHILIPS | HTS5530/78 | Red light press to turn on blinks very quickly white light doesn't turn on but turns on after a while | Capacitor exhausted. "ce503" close to ci-u501 worked 100% | Capacitor exhausted. "ce503" close to ci-u501 worked 100% | neupsx4 |
PHILIPS | 20PT4331 | TV turned on and off by pressing the channel button on and off. | Resistor 3523 47r altered pulse pine 11 ci 7520 tea1506t | Replaced perfect tv. | Claudio Rio de Janeiro |
PHILIPS | 42PFL3604/78R | Device completely inoperative. | The power supply fuse f801 (5a) was open. the cause was a short in capacitor c807 (330p x 1kv). | Once the fuse and capacitor were replaced, the device started working normally again. | José Luiz Enguer Pereira |
PHILIPS | 42PF7321/78R | When turning on the TV, it does not start by turning the power supply relay on and off. | The diodes were found to be shorted, d8020 (uf4007), d8006, d8007, d8018 (all em518) for a voltage of 2kv, and the fuse in the line of these diodes was also open. | After changing all the diodes and the fuse, the device started working normally again. | José Luiz Enguer Pereira |
PHILIPS | 40PFG5000 | Dark screen, back light on, normal voltages. | See cg4, in my case it charred the cg4 terminals, tsoundby opening the track that feeds the ci uc1. | arock | |
PHILIPS | 32PFL3404 | Turns off the screen and tsound is only sound. | Poor contact in the CN1 lamp connector solder | Disassemble the display and resolder CN1 connector and check if the others are firm. daniel electronics. phone: 43 99158-6898. | |
PHILIPS | SOM NX5 | The power comes on and tsound is no audio. everything lit, volume control works. | I noticed that the 12 volt voltage was missing. Leaving the power supply, it normally reached the PC board, but it did not feed the audio circuits. | See transistor q 301. I replaced it, 12 v came, tsound was no audio. If you see possible bad contact on the large flat, connect the micro to the control board. After the bad contact was corrected, everything was normal. | arock |
PHILIPS | 21PT5433/78R | Turns on normally, image appears and turns off | C 2303 | Replace without measuring the 2303 capacitor on the escreen that is on the RGB and the TV will work normally. God be praised! | Sinailson furtado |
PHILIPS | 32PFL5604D/78 LC9.2LA | It does not turn on, nor does the standby LED light up, tsound is 3.3v at the power supply but not 12v | Ci l6599d 12v and 24v voltage switch defective! | Replace it only after having carried out tests on the rest of the circuit to find out if approximately 15v is getting tsound! | Lucas |
PHILIPS | 42PFL3507D | Turns on whenever it wants, stand by off without 5v | Change the opto coupler ic 950 at the power supply, place a pc 817 directly replace | IRMAO | |
PHILIPS | 42PFL3604 TCM3.1L LA | After some time on, the screen would turn blue with a blurred OSD, the speakers would beep loudly and the screen would turn off. | C115, electrolytic, value 47uf/6v, is close to the reset stage | Replacement | Leonardo Gomes |
PHILIPS | 42PFL3507 | Negative image and retraces | C244(10µf smd) em curto na v-con | Replace c244 | Eduardo Fonseca |
PHILIPS | 40PFL3707D/78 | Won't turn on without 12v and 24v | Q903 open smd emitter collector close to the photocoupler | Jammed collector and TV transmitter started working again | LUIZ CONSERTOS |
PHILIPS | 32PFL3008D/78 TPS10.1L-LA | The LEDs turned on and off. The Philips logo didn't appear and it already turned off | Corrupted memory data | I re-recorded the data with a recorder, copy the data from another TV like it | rogerio.sc |
PHILIPS | 20PT529A/78 | Tv arms and disarms | T7408 =bd135 with open collector | Replace it with another and run to another | Antonio Carlos (Eletrônica Renascer) |
PHILIPS | 29PT6542 L04 | Hit the relay once and it won't turn on | 6573 diode connected to the photo coupler | brancobilli | |
PHILIPS | 32PFL3008D V2.11 | Duplicated or inverted screen | Type 062598 menu 003 and run for the hug | Mario Moreci |