PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14168
Results: 14168
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 40PFL3605D/78 | 12v voltageless power supply only with 3.3v voltage | C502 burst, q501 | LUCAS EDUARDO | |
| PHILIPS | 43PFL3008/78 | With audio and without video, the back-light comes on normally. | Software corrupted or incompatible with the screen, in this case I solved the problem by removing the memory from the old board and putting it in the new one. | An attempt was made to update the software and it did not resolve the issue. just changing the memory. | Eletronica ALLFATV |
| PHILIPS | PFL3404/78 | The relay hits and the stand by LED lights up and does not turn on on/off on the keyboard | Solution - turn on the control or turn on by pressing ch+/ch- on the TV's side keyboard | Emerson | |
| PHILIPS | 14PT110A | TV turns on, has normal sound but no image | Vertical output tda 3653b, I put the tda3653bq that I had in stock and it was beautiful | Eliel Magno | |
| PHILIPS | 163V5L | Secondary power supply zero v, disconnecting the main voltage 15.5, 0v appears | C smd 708 shorted next to c 701 the 708 is the largest smd in the pl | GDP2 | |
| PHILIPS | 32PFL5312 | Flashing screen | 24 volts from the inverter with only 20 volts | Replace photocoupler position u650 | |
| PHILIPS | 29PT658A L01.1L | No vertical scan | Diode 6487 (byd33d) leaks, opens resistor 3488 (4r7) and burns the ci tda8359j. unload the electrolytics that power this ci and now replace these components. Instead of the byd33d diode, you can use the byv95c. | Isidro | |
| PHILIPS | 47PFL7403/78 | Power supply/backlight test | Soldar stby com gnd - soldar resistor (1k 1w) 12v no bl_on/off - soldar resistor (4k7 1w) dim no 3,3v | Cláudio Negrini | |
| PHILIPS | 42PFL3403 | Doesn't start | Capacitor 2p29 short on main board close to wire connector, fsq510 | Replace the IC and remove the shorted capacitor | roberto costa |
| PHILIPS | 21PT6446/78 | Replace transistors and resistor | Q7455 and 7464 shorted and fusistor 3445 open | Replace transistors and resistor | Edfesom |
| PHILIPS | 29PT8457/78 | Blown fly-back | Fly-back | Replace the fly-back jf0501-2136 if you don't have this fly-back put the replacement which is the jf0501-8604 these two fly-backs also fit the model 29pt6566/78 | Sinailson furtado |
| PHILIPS | 221TE4L | Does not turn on completely dead nor does the LED light up | Cap c911 of 470 by 10v killing the 5v of power | eletronica sto ant rj | |
| PHILIPS | 42PFL3604 | Flashing red LED does not generate 3.3v | C806 4.7uf 400v seco | Replace c806 4.7μF 400v | beto2828 |
| PHILIPS | 20PT3336/78 | No color | After checking some options, I decided to change the memory. the color returned. | Replace memory 24c16 | Romildo Behrend Schwartz |
| PHILIPS | 32PHG5201 | Inverted image screen adapted from panasonic | 062598 menu 112 | O62598 menu 112 | Dj |
| PHILIPS | 32PFL3707D | TV turns off after approximately 20 minutes on | Replacement of the metallic capacitor 330µf/16v | I put a 470µf/35v 105degree capacitor and it solved it... | Mauricio Nunes FOCONET |
| PHILIPS | 29PT8457/78 | Does not help | Fly-back | Replace the fly-back jf0501-2136 replacement jf0501-8604 these fly-backs replace one another and are also available on model 29pt6566/78 | Sinailson furtado |
| PHILIPS | 32PFL5007 | Stand by LED flashes three times and does not turn on, low pfc | Fet stk0160 position q603 | HP ELETRONICA | |
| PHILIPS | 21PT9467C/78 | Reddish image | Q502 | Replace the Q502 and the TV will work normally | Sinailson furtado |
| PHILIPS | FWM998 E317642 R:1.3 | It doesn't turn on, it just lights up the power button | Check the CD tray belt, if it is loose or broken, it does not recognize the system and it does not turn on | Marcelo |