Search: PHILIPS
Results: 14168

PHILIPS Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILIPS20GL1049
Does not turn on, LED is off, with power supply activation signal.Found c2346 and c2347 of 47mf/160 volts dry (completely without capacitance), which, after being replaced and carrying out a general inspection of the other components, were found to be ok.Put the TV on the network, it worked normally.Luiz Cassiano
PHILIPS32PFL3322
LC7.1L LA
Dark screenCheck circuits related to "backlight"sim tv
PHILIPS32PFL3322
LC7.1L LA
Dark screenAdd a 1m smd resistor in position c1 on the inverter panelsim tv
PHILIPS32PFL3008D/78
No sound. all voltages present, but no volume menu appears.Flash recorded for version 2.07sim tv
PHILIPS32PFL3008D
It doesn't turn on, the power supply was okResetsim tv
PHILIPS32PFL3008D
Inverted image and no soundCorrupted flashsim tv
PHILIPS32PFL3007D/78
Stuck on the philips logoFlash memorysim tv
PHILIPS32PFL3007D
Don't care, dead330µf/16v capacitor c9353 from 5v supplysim tv
PHILIPS32PFL3007D
Connect 12v and 24v power supply outside the TVSee obssim tv
PHILIPS32PF5321/78
Sound has a whistling or buzzing sound.Check/replace the 2013 smd capacitor (22nf 50v 0603) on the class d amplifier panel.sim tv
PHILIPS32PF5321/78
No sound. (with or without image for TV, VCR, DVD).See obssim tv
PHILIPS32PF5321/78
Indicating f or cf on the screen (factory mode active).Press the [volume "-" & program "-"] keys simultaneously on the TV for 5 seconds.sim tv
PHILIPS32PF5320
The image keeps flashing and sometimes turns off.Leaky power supply photocouplerssim tv
PHILIPS32PF3320/10
LC4.5
"f" is displayed on the screenPress the "volume -" and "program -" keys for 5 seconds at the same time.sim tv
PHILIPS32PF3320
LC4.5
An "f" appears on the screen. the TV is in factory mode,To exit, press both the "Volume" and "Program" "-" keys for approximately 5 seconds.sim tv
PHILIPS30PF9946/46
TV turning off the screen after 5 minutes with audioInverter boardsim tv
PHILIPS29PT5642
It didn't work and the power supply output voltages were all at 0v.T5531 of the auxiliary power supply with the winding wire corroded at the terminalsim tv
PHILIPS26PFL3404/78
Altered tone or inverted colorCheck welding and dirt on the ic u4201 on the ssb panelsim tv
PHILIPS26PFL3404/78
Interference when connected to hdmiCheck welds on: r1501, r4404, rp4404, rp4406sim tv
PHILIPS26PFL3404/78
One of the colors in cvi is missing or has an irregular colorCold solder c1206 or r1203sim tv