PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14168
Results: 14168
PHILIPS Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS | 40PFL6606D S L11M1.1L LA | Doesn't even turn on the LED | Keyboard | I removed the cable from the board and it started working again, I cleaned it with isopropyl alcohol and it resolved | Eletrônica Ômega |
| PHILIPS | 42PFG6519/78 | Stuck on logo and inverted image | Replace a pci principal | Type 062598 + menu (box) + screen code (back cover) if it turns on with inverted image type menu (box) + 1999 + return on the control, replace the flip panel option to off or vice versa. | Marcelo-Birigui/Sp Eletronica Audio e Video |
| PHILIPS | FWM3500/55 2013 | No sound turning on normally | L605 | Replace micro inductor 12. | PU9GTA |
| PHILIPS | FWM6500/55 | Does not turn on, does not come out of stand by (stand by LED on) | L544 on the CD board | Janilson JD ELETRONICA CAETITÉ-BA | |
| PHILIPS | 42PFL3507 | So acende stdby | When you turn on the signal board, the 5v at the power supply drops to 2.7 | 9353 power supply capacitor replace without testing | alexandre |
| PHILIPS | NTRX500X/78 | Didn't care | Shorted power supply diode d8 | Just replace diode | Valerio |
| PHILIPS | 21PT5433/78 | Vertical from the middle up closed and device turning off. | Smd diode position: d6460 bas316, as I didn't have it I used the 1n4007 and that's it. TV working perfectly without conflicts. | EletroGarske | |
| PHILIPS | 21PT5433/78 | When it starts up, a blurry screen with blurry colors appears, very weak and without brightness. lasts 4 to 7 seconds and goes into cut | Bc546 board position:7463 | EletroGarske | |
| PHILIPS | 40PFL4007G | Turns on and doesn't leave the Philips logo | Regulator u701 or u415 3v3 | If the voltage is higher or lower and just replace | ELENILSON |
| PHILIPS | 42PFL4007G | When turning on, the TV hangs on the blue screen saying "HDMI". It doesn't respond to any commands on the TV's remote control or keyboard and it doesn't turn off. | Firmware (pkg) corrupt. | Software update via USB. After the update, the TV will restart and the reset option will appear. click ok and call the customer! | GM Televisores |
| PHILIPS | 20PT222A L7PLUS | Vertical lines from top to bottom shaking | R3408, 220r, replace. | Joaomvjr | |
| PHILIPS | 29PT4635/78 | Image closed on the sides (03 fingers on each side) | I had nowsound else to look for this defect, for a few days I checked all the tips from my colleagues and nothing. | I decided to remove the driver that is in position 3430,3431. the image opened, as tsound was no other one to restore it, it remained like that (without the driver). I tested it for a few hours and that's it! | KÁIO/ E.S |
| PHILIPS | MCM-285 | Hoarse and low sound | C319 (100μ x 16v) com fuga. | Just replace. Note: a 220μ x 16v can be placed and it will be fine. good luck friends. | Giovani |
| PHILIPS | FWM650 | I'm sound | 642 in the power supply of q611 that outputs 12v, which feeds the q607 in ci q601 on pin 1 has 8v | Cap 642 220μF that feeds base. | GUINGA sdia - goias |
| PHILIPS | NTRX-505/78 | It turns on, but tsound is no sound and it works partially, with the mixer setting in the middle, it keeps hitting the speaker, in fact the operation is incomplete, some LEDs for functions "a and b", type usb "a"/aux/tuner/etc , do not light | All normal power supplys at the bottom, but on the main panel, the top of the device on the main board has a 47uf/10v position cap c521 that its "esr" is changed, only with an esr reader capacitance to find out, then in Doubt change this capacitor. the c521 is located next to the ic "u501 on its pin 38 | Swap c521 electrolytic 47μF/10v | MIGUELTV |
| PHILIPS | 14PT6107E/00 TDVD1.1E | Does not start, LED blinks | Check cp12 and rp06 | jose almeida tavares | |
| PHILIPS | 21PT6456/78 | Turns on with red lines top with luminous stripe bottom closed and off | Resistor 3448 | Replace is over | Eletrônica ramos |
| PHILIPS | 21PT6456/78 | Does not open vertically with red lines turns off r3470 | Change without measuring | Eletrônica ramos | |
| PHILIPS | 21PT6456/78 | Vertically closed at the top about 5 centimeters and turn off | Replace open resistor r3446 | Replace is over | Eletrônica ramos |
| PHILIPS | FWM210 | No audio and making crackles in the pre signal | Mosfet q502 buk7535 e ic501 tda7498l | Muniz eletrônica |