PHILIPS TV Repair: Common Faults and Solutions.
Search: PHILIPS
Results: 14168
Results: 14168
PHILIPS Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS | 26PFL3404/78 | Partially illuminated display | Possible leak in transformer t803, q801 and q802 - ipb | sim tv | |
PHILIPS | 26PFL3404/78 | Remote control does not work | Check welds fb02 (panel ir) and fb205 (panel ssb) | sim tv | |
PHILIPS | 26PFL3404/78 | One of the colors in cvi is missing or has an irregular color | Cold welding ci u4201 | sim tv | |
PHILIPS | 26PFL3404 | White screen and no image, but it had sound. | Bad contact on ci u1 of the t con board, and bad contact on the flat cables. | sim tv | |
PHILIPS | 26PFL3404 | Without image and with audio | Inverter power supply | sim tv | |
PHILIPS | 26PFL3404 | Vertical white streak on the screen | T-con board connector | sim tv | |
PHILIPS | 26PFL3404 | Does not turn on or intermittently turns off | Poor contact in the t803 solders | sim tv | |
PHILIPS | 26PFL3404 | It turned on, sound and image normal, after a minute on, it turned off. all normal voltages, pfc=390v | Ci ic901 tny277pn | sim tv | |
PHILIPS | 26PFL3404 | It turned on, and worked normally, but sometimes it turned off. without apparent cause | 5v supply varying, due to the high heating of the tny277pn ci | sim tv | |
PHILIPS | 26PFL3404 | Displays factory information. | It was in store mode. change to home mode. | sim tv | |
PHILIPS | 26PFL3404 | Turns off after approximately 4 minutes. | Ic901 tny277pn | sim tv | |
PHILIPS | 26PFL3404 | Back light does not come on | Inverter transformer | sim tv | |
PHILIPS | 26PFL3403D/10 TCM2.0E LA | Mains led comes on and goes off immediately (you hear the relay switch on) 5 v of power supply | Ic1- viper22a | sim tv | |
PHILIPS | 23MW9010/37 LC03.U AA | I'm sound | Sound output ic7731, (an7522) | sim tv | |
PHILIPS | 22PFL3017 | Doesn't work, test the power supply. | See photo | sim tv | |
PHILIPS | 20PT529 | Either it turns on or not. power supply with zero volt at +b 95v | Optocoupler | sim tv | |
PHILIPS | 20PF8945 | Pink screen, with or without image. | Check FET 7954 (LCD display VCC pan power supply) and components connected to it | sim tv | |
PHILIPS | 20PF4121 LC4.1E AB | With sound, without image | Capacitor ce06 and ce07 both 1000µF on the power supply board (PSU). | sim tv | |
PHILIPS | 42PF9631 BJ3.0E | Without sound and image. turns on and flashes for 1 or 2 seconds, relay turns on and off LED remains green | Check crystal 27mhz | sim tv | |
PHILIPS | FWC270 19 | No sound good output, slight hiss | Transistor smd 7606 | Remove and test the sound should come out without it | matrix10y |