Search: Philco
Results: 4741

Philco Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILCO28X215712A7F
Doesn't work.Cold solder on the d806, +b125v. tsound are two diodes in parallel, very subtle cold solder on the cathodes. (solved)lucas40
PHILCOPT-14U56
Turns on and off at the same timePhilco turns on the led, presses the power part and turns it off at the same time cause solved (909) io resistor (r910) (r912)eletronica ceara
PHILCOTP-2054
The LED turns on and it doesn't workThe power LED lights up, the power LED flashes, the defect and the diode (d909) and two resistors (r910) (r912)Replaceeletronica ceara
PHILCOTPF2121
Defect: it is only on standbyCause: cap c715 no loadklein
PHILCOTV-1452N
Turning off after + - 5 secondsR711 open c719 shorted 180 v lineReplacement r711 and c719Otrebor
PHILCOTP1452
Missing red colorR812 smd on tube plate with cold solderResolder it including the other componentsANTONIO NOBREGA(PATOS PB)
PHILCOTODOS PH
Blue screen on all channels and the varicap was changedMemory (24c16) unrecordedRe-record it or replace it.RONALDO
PHILCOPH29C
Vertical shaking half upR305 1r8 openVarela
PHILCOTP-1452N
The TV screen is wide at the bottom and narrow at the top, looking like Christmas treesThe defect was the deflectorReplaceEletroclaudio Aguas Belas PE
PHILCOPCR 2049
CPH-06M
No image with hissing in the speakerC730 100/50vBETOTECK
PHILCOTFP2130
Does not turn on, LED blinksR701 bad contactidasilvaj
PHILCOPCM2044
Blinking ledR 720 openmultsom
PHILCOPCR-1447
DeadPage 11, Page 13Replace c911(100u/25 volt) and c913(1/100 volt)Jarbas santos (ELETRO-SERV)
PHILCOTP 2054
TV with a black stripe on the sideC/705 smdReplace for 10 nEletrônica Ômega
PHILCOPCM2046
Tsound was no more b with 10vCapacitor c911 220uf 160vReplace without measuringtome
PHILCOPCS2976S
Does not turn on, no voltage on the secondaryR911 aberto = 2m2 no pino 11 do ic 901Bruske
PHILCOPCM-1444
DeadDefective flyback and open 180v r715Jaison
PHILCO14
Vertical closed and ci heatsReplace o ci tda9309Replace o ci tda9309rafael
PHILCOPCS- 2976
The stand-by LED turns on, when trying to turn it on, the LED turns off but it does not turn on.Ic 903 = tl 431FERNANDO S
PHILCOPCS 2976
Flickering image on the sides only at 220 vacC-919 from primary power supply 1n5 x 2kvFERNANDO S