Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4741
Results: 4741
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PH 21C | Call sometimes | Q881-2n5551 / ic803-ka431 / r881-82r | Replace mentioned items | eletronicaapolo |
| PHILCO | PCS2952 | Retraction | R 715 open and c 806 with leak | Replaced problem solved | PAULAO |
| PHILCO | PCM 1451 | Image does not open, blinks, green display with lines | Change resistor-715 next to the flay-bak | paulo prado | |
| PHILCO | TP-1400 | LED blinks, oscillates and cuts out. Flashing. | Diode d-909 or d-908 open | samuel leite | |
| PHILCO | PCS 2956 | Does not oscillate horizontally | D 701 (+b3) as escape | ||
| PHILCO | TPF2121 | Reduced screen and no image | C-907 low capacitance | audi car - Roberto | |
| PHILCO | PC 2046 | No video with incomplete line in the middle of the screen | Ic 701 | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
| PHILCO | PCS2952 | Protecting when turned on, returns to intermittent stand by | C128 connected to pin 35 of the micro | Replace tips from the head | itan |
| PHILCO | TP 2054 | TV turns on with green screen and retrace lines, voltage on the green tube tube with 0v | Tube socket | Replace socket | afonso taquari eletronica |
| PHILCO | PCR 2049 | When you change the channel, the brightness increases and the TV turns off | C 711 (1k100) | MB ELETRONICA | |
| PHILCO | PCM2044 | Vertical closed | Ic 601 | juci | |
| PHILCO | PCR 2049 | Turns off by itself after about 10 minutes | C 704 (471/2kv) | MB ELETRONICA | |
| PHILCO | TP-2920 | Horizontal closing on the sides (cushion effect) | Zd1702 with leak (does not show on multimeter) | Replace do diodo zener zd1702 (8v2) | andlss |
| PHILCO | TP 1454 | Does not turn on, LED blinks | R922, cold welding | Resolved | jcosme |
| PHILCO | TPF 2940 | Turns off immediately after turning on. | C1701 e c 1703 | Replace without measuring. | Manoel |
| PHILCO | TP-1454 | Turns on standby, but does not turn on | DS08 | Shorted diode, just replace it | This email address is being protected from spambots. You need JavaScript enabled to view it. Marcondes Jaicós-PI Ohm eletronica |
| PHILCO | TP 2052 | Blinking led | Resolder smd components at the power supply | ÁdrianChapadãodoCéu | |
| PHILCO | TP1454 | No video, screen with colored spots | R910 and 912 | If your phone is buzzing, replace d909 short | marcondes, OHM eletronica Jaicos-PI |
| PHILCO | TP2052N | It doesn't turn on beeping without the +b on the flaybk pin | The cause was the shorted capacitor c924, sending the +b to ground. | I replaced the capacitor and the power supply armed, I hope this tip helps some friend on the forum. | This email address is being protected from spambots. You need JavaScript enabled to view it. |
| PHILCO | PC2043 CPH-5 | Turns off and buzzes | R706 e c716 | R of 10k replaced and c22n replace both | marcondes, OHM eletronica Jaicos-PI |