Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PCM-2044-6 CCCCC | Hiccuping with blinking LED not starting | Does not oscillate | Redo the tracks from t702 to r703 and c709 to t702 with wire okreplace c709 | ANTONIO DOS SANTOS LIMA |
| PHILCO | PCM 1443 EMOTION | TV with no picture, no sound, screen drizzling even with an antenna. | Solution: replace 2k.7 resistor 201, which connects to the tu-oo2 pin a g c . open resistor. | BARRETO CRUZ | |
| PHILCO DVD | PM190 | Doesn't start | Diode zenner zd1 5v6 | Replace diodo zenner zd1 5v6 | johnny busnadiego |
| PHILCO | TP2920 | LED does not turn on | Change cap. 1000x16v at power supply | Cap. 1000x 16v fonte | ELETRONICA MAURI JUNIOR |
| PHILCO | TP2054 | TV starts working + no image appears. waiting about 5 seconds. appears with a smooth screen, with vertical and horizontal lines wanting to close. | Change the cap. 6n8 x 2kv. which has a low value. (5n6 x 2kv) | ROBERTO PINTO | |
| PHILCO | TPF2922 | Normal league, with horizontally expanded image | The dz1701 was replaced | ROBERTO PINTO | |
| PHILCO | TPF2922 | Sometimes it turns on, sometimes it doesn't. When it turns on, it has a black stripe at the top and bottom, with excess red in the image. | The precision resistor r725 was replaced and an adjustment was made to the flyback screen | ROBERTO PINTO | |
| PHILCO | PC1443 | Vibrating t901 (power supply buzzing), not having high voltage. | C921 to power supplys. | C291 de 22n/50v | Ademir tc |
| PHILCO | PCM2044 | Doesn't catch any channel | Ceramic capacitor | Ceramic capacitor on pins 42,43 and 44 responsible for inputting vhf,μHf and vl signals | WILLIAN8952 |
| PHILCO HI | PC1442 | No sound normal image | C420 shorted | Replace | EletroClaudio Aguas Belas |
| PHILCO | PH200 | Inoperative, only blue volume LED on! | Open smd l4 inductor | Replace l4 for another... | pfa |
| PHILCO | TPF2121F | The TV only turns on by pressing the power button on the panel, that is, it does not turn on with the control. | Defective sensor, position ir1101 which is on the plate on the front panel of the TV, sensor rpm-693b. | It was replaced for an identical one and it looks great!... | Armando de Olímpia |
| PHILCO | TP-2052N | Dark screen with no image and with normal sound when the screen increases, a torch appears like an arcuires | Defective vertical output tda8356 | Replace | EletroClaudio Aguas Belas |
| PHILCO | PCM2044 | Poor convergence, in the image and characters, and heating up r711 | Oxidized deflector coil | Replace deflector | PALAURO |
| PHILCO | PT | Power supply did not oscillate | Ic do som | Replacement | |
| PHILCO | PCM-2051 | Volume increases or decreases every 10 points | Memory defect | Reset the memory: unplugged, press and hold the ch+ and ch- keys on the TV. Turn on the power and wait about 5 seconds until the stand-by LED lights up. release the pressed keys and turn on the TV and reprogram the channels and settings. If the defect returns, replace the memory and perform a reset. | Diego PG-PR |
| PHILCO | PCS-2976S | Resolder tube board 6 wire mesh | Resolder | SEM IMAGEM TELA AZUL COM RETRAÇO | |
| PHILCO | PCS-2956N | Works for a while and turns off | Weapon protection | I removed the resistor r 932 and it worked normally | noel batista |
| PHILCO | PH200 | Does not turn on as if the power supply has a problem | Remove the tda7265 sound output, if it turns on, replace it | Replace sound output | Cezar |
| PHILCO | PCM 2051 | The TV turns on and off in seconds | R 705 3r3 measuring good to put a jamper | eletronica rodrigo 048 32429465 |