Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | TP14U56 | Philco tp-14u56 (service mode) (solved) | Press menu and vol+ simultaneously - plug the power cord into the socket and wait 5 seconds - release the keys and press the power key - when the TV turns on press menu and it will be in service mode. | EletroClaudio Aguas Belas | |
PHILCO | TP14U56 | White screen with lines of retractions | R714 4r7 1 in | EletroClaudio Aguas Belas | |
PHILCO | TP-2052 | Turning off intermittent | Instability (voltage drop) on the 5v line of the micro | C102 - ceramic smd next to the micro on the 5v line | Edil |
PHILCO | PCM-2144 | Vertical doesn't open all the way, lacks height | R601 680k changed | Replace | deuner |
PHILCO | PCM-2144 | Vertical doesn't open all the way, lacks height | R601 680k changed | Replace | deuner |
PHILCO | TP2010 PCI 016 | LED lights up but when turned on LED blinks and lights up again | Cold weld no r936 | Valmon | |
PHILCO | PCS 2956 | When turned on, it only activates the relay but does not trigger the horizontal oscillator. | I removed the q707 from the protection line and the TV went off. | This email address is being protected from spambots. You need JavaScript enabled to view it. | |
PHILCO | TP2053 2053 | The LED doesn't turn on and the power supply doesn't start | Q903 short | dedesom diogo lopes | |
PHILCO | TP1452N | When turning on the LED goes off for a second and comes on again, the TV does not turn on. There is no sign of generating, power supply ok. | Protection circuit that goes to pin 29 of the micro (ci 101). They are: d941, d707, d706, r941, r942, r943 and r718. | In my case it was the zener d941 (30v) it was good with the multimeter, but it showed a high leakage when heated with a welder. | Manoel (Noca) |
PHILCO | 1435 CPH03 | Vertical closed, vertical output and oscillator good, nothing opens. | Check r684 on 14" is 8k2 | Master Eletronica | |
PHILCO | TP20V56 | Vertical closed and the TV turns off in seconds | Ceramic capacitor c614 - replacement is necessary, not removal | C614 ceramic capacitor replaced | STUDIONAZA |
PHILCO | TPF 2121 | Strong noise in the power supply driver transformer only in standby | Check c 930 smd at power supply | Master Eletronica | |
PHILCO | TP 1454 | TV turns on without color, suddenly turns off and or turns on dark screen only characters sometimes it doesn't turn on and other anomalies | Check sda and scl line must have 5v each, if not, check c118 and c119 | Master Eletronica | |
PHILCO | PMC2044 | Closed vertical and lack of synchronism | Ci601 tda3653b / cap.205 2,2/50v | Replace mentioned items | eletronicaapolo |
PHILCO | PH 14B | Half screen closed | Head. 471 of 220/25v | Replace mentioned item | eletronicaapolo |
PHILCO(PARAGUAY) | TV PH29 | Magnetized tube, coil does not work. | Rt 501 (ptc) | Replace | ÁdrianChapadãodoCéu-Goias |
PHILCO | PCR2049 | TV doesn't turn on | Normal power supply voltages, horizontal drive receiving pulse from the chroma and y processor, normal micro voltages, and the TV does not turn on | Replace without measuring c407 and 406 | Ricardo Alves / Eletrônica do Ricardo / Caeté MG. |
PHILCO | TP14U56 | Does not turn on, nor does the LED pin 14 IC901 zero volts light up | D915 leaking, there is no point in measuring, you have to change it, it says good | Replace d915-1n4531 you can put 1n4148 is the same | beto2828 |
PHILCO | PCS 2976S | Activates horizontally and turns off | R702(smd) 3k3 na linha do 180 volts | eletronicaaeb | |
PHILCO | TP1454 | No image but with characters - dark screen | Replace d 601 - like leak | ELETRÔNICA ESTUDIER - CANOAS RS |