Philco TV Repair: Common Faults and Solutions.


AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HISENSE
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: Philco
Results: 4740

Philco Repair Guide: Common Issues and Fixes

Brand Model Fault Detailed Problem Solution By
PHILCOTP1453
Turn it on and heat it up r917IntermittentReplace coupler photoSchulz
PHILCOPCM-2046
Sem 5v no micro,led stand by apagadoDz904 (30v) e r923(1r 3w) abertoReplace the twobeto2828
PHILCOPCM 2046
Reduced frame in four cornersPower supply all ok, micro, oscillator, vertical everything you can imagineDirect fly back replaceNeguinho(itapevi) SAE-TAV ELETRONICA
PHILCOPCM-2046
The TV was turning on and off quickly without stopping.Change all the power supply capacitors and also close to the flay back (the electrolyticsBecause the low microfraids of both causes the power supply to tripThis email address is being protected from spambots. You need JavaScript enabled to view it.
PHILCOTP 1554
Vertical does not stabilize and cuts image at the top, changeChange the two power supply capacitors: c914 and c 918 which filters the -12v and +12v. Don't test, change soon.caio
PHILCOTP1454
CPH06		TV doesn't remember, screen closed halfway down, sometimes it turns on, sometimes it doesn't turn on and when it turns on, it sometimes retracts and sometimes drizzles.Ic102(eeprom) I just took it out, cleaned the board and put it in and it was beautifulsamuel3d
PHILCOTP 1453
It doesn't arm (it looks like it will arm, but it doesn't). I enlarged the screen and insisted several times in a row that the image appeared and I saw the frame reduced.Deflector coil.Tec Vídeo
PHILCO1453S
TV does not turn on via the keyboard or the keyboard does not work or does not workThe keyboard is certainly locked, turn on the TV with the control and go to the channel. If the user has forgotten the password, use the factory password which is 7658 and unlock the keyboard, it will definitely work.bel araguaçu
PHILCOTPF2121
2121		TV with feedback line turning off when changing channels closes screenCapacitor c 715 do horizontal with low capacitanceReplace for a new oneeletronica marcos melo cascavel ce
PHILCOPCM2044
TV turning on and off intermittently, the LED also blinks along with the TVGo up to the resistance (r713) of 100k it may be alteredThis email address is being protected from spambots. You need JavaScript enabled to view it.
PHILCOPC-2136
No contrast.Exchanged at r- 765- 56 k hmsjaironuness
PHILCOPC-2046
TV only has one channel without menu functions. no characters.I changed the ic- 101- m 37210m3-709-sp. You can put the m 37211m2-603 sp which works normally.jaironuness
PHILCOTPC 2910
Disarms after a few hours.(c 805) 10mf 160v secoReplace, for 47mf 160v it's cool!!IGOR ALMEIDA
DVD PHILCODV-P4500
Goes crazy, opens drawer, goes into stop, pause mode...C611 in open power supply or changed direct exchangealpha eletronica
DVD PHILCODV-P4500
Display offChanging d609 at the power supply is no use measuringalpha eletronica
PHILCOTP20V56
Power supply does not oscillate or light up stand by LEDSmd capacitor c984 in c.i. power supply oscillatoreletronica fernandes
PHILCOTP20V56
Power supply does not oscillate or light up stand by LEDSmd capacitor c984 in c.i. power supply oscillatoreletronica fernandes
PHILCOPCS2952
Stand by led blinking and power supply oscillatingR949 of 47Ω changed, it is on pin 7 of the t901 transformer.eletronica fernandes
PHILCOPCS-2956N
Turns on with high voltage, makes a few clicks and turns offFlay-back ruimI replaced it, it was fine.Eronaldo
PHILCOTP2052N
Replace these components and the device will work normally again.Philco pcs-2976 dead, supply high (170 v) change resistor 917 (2k2) diode 908, d 902 (transistor type) ic 802 (photo-coupler)Replace these components and the device will work normally again.Elias