Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4758
Results: 4758
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PH28S63 | Does not turn on blacklight | Vomiting | Tsound is no point in measuring | eletronica central |
| PHILCO | PCM2044 | LED flashing, generates high and cuts intermittent | C720 47uf x 25 | Replace c720 47μF x 25v | EDIVAN ELETRÔNICA |
| PHILCO | PH32S61DG | Red LED lights up but then goes out | Update software | Edson SP | |
| PHILCO | TP1410 TP2010 | Does not turn on, relay keeps knocking | R927(120kω) open | Replace r927 | Edson SP |
| PHILCO | PH21B | Does not turn on, LED flashes quickly with a clicking sound | Capacitor c438 burst and horizontal output d1555 with leak | Replace them | bse eletros |
| PHILCO | PH21MSS | Turns on, a list appears as if you were touching the screen and turns off | Change electrolytic cap on the secondary optocoupler, transistor 2n5551 and rewrite the memory | DJ PITUKA | |
| PHILCO | PH21M-SS | Missing red color | Bad tube | Kinescope | Joebson Sat |
| PHILCO | PH29 US A2 | Horizontal light strip at the top of the screen. more visible with blue screen. | Change capacitor c 404 of the vertical circuit | sergio | |
| PHILCO | PH24M | Does not turn on, LED is on | Remove the flat that goes to the screen, if it turns on and the screen is defective | In my case it was the screen that was bad. | Josemar afonso |
| PHILCO | PH21M2 TUBO | Does not turn on standby off all battery voltages zero primary capacity charged | Open r521 of 121k only rings for the same value | CÉSAR | |
| PHILCO | PH21M SS | Turn on LED blinks and does not turn on. | In my case it was the primary power supply electrolytic 220nf 400 volts. | Capacitor gets very hot. | luiztvsom |
| PHILCO | PH21MSS | The stand by turns on but when pressing the keys the LED flashes and lights up again with a noise on the fly back, +b with 20v when you press the key it rises to 115v and drops to 20v again | Ic301=la70141 | I replaced and ran to another one | Antonio Carlos (Eletrônica Renascer)Boa Vista do Gurupi-MA |
| PHILCO | PHT660N STA540AI | Tsound is no sound | -12v power supply very low and has no sound. | Changing the r59-100k resistor and changing the 47μF - ce206 capacitor on the logic board. measure l102-smd, check q1 and dz1 12v. | LUCIANO ALQUEJA |
| PHILCO | TP1410 | Does not turn on with standbay turned off without +b power supplys | Capacitor 150por400v and the tea1507p shorted due to an energy discharge | I put the new components in and the TV was good again | Lambuquenta eletrônica |
| PHILCO | TCS-2956 | TV turns on, normal sound. image missing to fill the horizontal sides. with cushioned effect. | Resistor r-722-10r 2w e replace do capacitor c-707 bipolar 6,8mf-50v | Giovanni George de Paula | |
| PHILCO | PH21M SS | It only stays in standby when you activate the key, the LED goes out and then starts flashing, +b power supply with just 20v | Cause: semi-open d813 diode | Klein | |
| PHILCO | PH800 | I'm sound | Q205 s8550 collector base short, check q212 s8050 | Q205 replace for db140, q212 for using bc548. | carlossbs |
| PHILCO | PH14D | Greenish | Rt 801 just changed | DEAN ELETRONICA | |
| PHILCO | PH21MSS | Does not turn on the lock LED at the power supply | Lineage 1337b | Replacement | Fico vila rica mt |
| PHILCO | TP2920 | Vertical lines at the top burning r709.18r and turns off | Replace capacitor eletrolitico c733 ,22x100v | Replace capacitor eletorlitico c733 ,22x100v | DJ PITUKA |