Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
Brand | Model | Fault | Detailed Problem | Solution | By |
---|---|---|---|---|---|
PHILCO | PH21MSS | Doesn't turn on, doesn't light up stay bay +b stays low | Dz804 defect | antonio claudio herdy | |
PHILCO | TP2920 | It just stays on standby and disarms immediately | D 1701 shorted, replace the two d1701 and d1702 | I mismarked the tip above, the diode 1401 has nothing to do with it, but 1701 and 1702 | JAIR PEREIRA |
PHILCO | TP2920 | When it turns on, it shuts off immediately | Diode d1701 shorted, replace the two d1401 and d 1702 | JAIR PEREIRA | |
PHILCO | PH21US A1 | With bright scenes, thin white stripes appeared at the top of the screen, with dark scenes, 3 colored stripes appeared, red, gren, blue. | C 406 100mfx25v com 6,5 mf. | Replace c406 | josé braga |
PHILCO | PH21M2 | Image with a horizontal black stripe | Change cap c450 .681 2kv next to the flyback | DJ PITUKA | |
PHILCO | PH58E30DSG | Turns on then turns off on stand by | Stand by, alterado | Replace ci u201 viper17l, d 218, d 200 capacitor ce2 10μF 450v, and be happy | carlos df |
PHILCO | PB120N | Does not exit stanby by | Function key (radio/CD) completely inoperative | Clean the function key | Eletronicaaeb |
PHILCO | PH32B28DSGW | Backlight LEDs are not very bright. | D970 sr3100 shorted. | Replace d970. | Andrey |
PHILCO | PH24D21D | TV does not turn on, nor does the stand by LED light up. | Corrupted software | Rewrite eprom. tip from friend sergiomga who provided a link. https://www.4shared.com/s/fuuuncgtmee | Gerson Digitecnica |
PHILCO | PH21D | Doesn't start... only after insisting a lot | Cp 881 47uf 25v i cp4u7 50v next to the vertical output..both with high esr | José técnico | |
PHILCO | 2051 | TV inoperative stand-by LED off and a beep on the traffic. | In my case, a high leak caused the horizontal to short out. and the vertical was damaged, which also charred the r 605 (33 r) | Patch or replace the fly-back and replace the vertical (tda8356) and the r 605. | Edfesom |
PHILCO | PH21M-SS VER.B | R-816 from 150r toast when changing it smoked | Q-802 shorted | Changing the r-816 r-818 and q-802 worked perfect | ELETRÔNICA CAVALCANTE MARTINÓPOLE-CE |
PHILCO | PH21B | Vertical closed and shutting down | Shorted varicap | I released the 5v. the TV worked | Robenilsom |
PHILCO | PH21SS | Horizontal closed on the sides around 5 to 6cm on each side | L441, close to horizontal with magnet | Edson Gomes | |
PHILCO | PH32 PH3220 | No image back light on | Tcom connection with burnt out display | The only way is to replace the entire display | Leandro leite |
PHILCO | PH21M SS | Turn on the image and turn off | C318 4.7micro dry electro cap is in the protect stage | Replacement | IRAN FORTALEZA |
PHILCO | PH21SS | Vertical with lines and buzz | C 562 | eletronica ph | |
PHILCO | PH21MSS | The LED doesn't even light up | D818 shorted | Claudia resonant electronics - mt | Damascena Eletrônica ressonante |
PHILCO | PH21MSS | Heating and burning vertical outlet la78041 | CI voltage is +14 and -14 were tsound for 17v, the fight was bad lol | After changing the la78141, also mercilessly replace the r829 for a 150k one that regulates high voltages, and everything goes back to normal... | Max |
PHILCO | PH32U20DSGW LED | Red LED but it doesn't turn on | LED burnt out, just replace | Genario |