Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | TVPH21MSS | Vertical reduced almost completely and colored stripes in the center | D-301 amended | Replace d-301 fr104 | samuel leite |
| PHILCO | PHT550 PHT550 | Burned fountain | After changing the cap. 120x200 primary power supply and 13005 + r15 and r52 it still wouldn't turn on and a humming noise heated up the t1 and t2 | D18 and d20 ---- shorted after the replace, it worked 100% again | neupsx4download |
| PHILCO | PCM 2046 | It does not tune any channel giving the impression that it is the varicap selector. | L001 open | Danieleletronica | |
| PHILCO | PCM-2046 | TV working normally but with noise on the screen in both vhf / and av. looking like a sawtooth in the horizontal direction, only a band of about 8 to 10 cm | Change capacitor (c-709) worth 10k x 100 volts polyester connected to the collector of the q 702 horizontal driver. | Ademar Videira SC | |
| PHILCO | PCM2051 | Sometimes it turns on, sometimes it doesn't | Capacitor eletrolitico c911-100uf/25v | eletronica lelo | |
| PHILCO | PH21MSS | Turns on and off | D819 shorted | alvaro peralta | |
| PHILCO | TV PH21MSS | Colored lines at the top of the vertical tele closed | R306 of 220r open close to the deflector socket | jpsky | |
| PHILCO | TV PH21MSS | Colored lines at the top of the vertical tele closed | R306 of 220r open next | jpsky | |
| PHILCO | PH21USA1 | It doesn't turn on, the LED goes out but it doesn't oscillate, +b goes to 125v and drops until zero. | R552 of 100k and r554 of 150k open. | luis carlos [nene] | |
| PHILCO | PH21USA1 | It doesn't turn on, the LED goes out but it doesn't oscillate, +b goes to 125v and drops until zero. | R522 | luis carlos [nene] | |
| PHILCO | TPF212130 | LED on, blinking several times | Tl431 with fault ic903 | orlando lott | |
| PHILCO | PH-21B | Vertical closed | Check cold solder no no jamper w-570 that powers or diode d-556 | Ademar - Videira SC | |
| PHILCO | PH 21-SS | Tsound is no +b in secondary school | Change the resistors (r-552 100k and r-554 150k) | Ademar - Videira SC | |
| PHILCO | PH-29 US-A2 | Screen with retraces. | Check cold solder on the fly back pin that generates the 180 volts. | Ademar - Videira SC | |
| PHILCO | PCS-2700 | The LED just keeps flashing and it doesn't work. | Change the capacitor (c-720) 47 x 25 volts, located near the vertical heatsink | Ademar - Videira SC | |
| PHILCO / GRADIENTE | 2922 | Does not open vertically | Change eeprom memory | Ademar - Videira SC | |
| PHILCO | TP1453S | LED lights up when you press power, turns off and then starts flashing | Fly bek | Replace fly bek ov2094d1 | edezio eletronica |
| PHILCO | PCS 2976S ********** | Turns it on and off then note: release pin 36 from the do-it-all, the TV has to turn on with a 20 inch frame | C701 changed and c703 open, change both and everything is ok | Replace both with the same value 6k8 | ELETRONICA IDEAL |
| PHILCO | PH14C | Blurred and rainbow image | Dv564 with cold soldering | Resolder | ELETROCLAUDIOPE AGUAS BELAS |
| PHILCO | TP-1454 | The TV was inoperative, the LED was off | F901=blown fuse, q901=2sk2740, r911=2m2, zd906=12volts, ic901=tda16846p, after changing the components the TV started working properly again. | ELETRÔNICA MELO BOA VIAGEM -CEARA |