Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | PH21M2 | Very dark image and black menu characters | Bad transistors v921 v931 v911 brc3688 kinescope board | Replace the transistors on the kinescope board v921 v931 v911 brc3688 | Duliz180 |
| PHILCO | TP2054 TP2053 TP1453 | TV has sound, OSD(characters, but the screen is dark "black". | It can be abl or vertical line. | In my case I replaced d602 near the vertical output, tip from elecreplacempos. | eletronica fernandes - to |
| PHILCO | 2976S 1643 | Called and chatted straight away | Defective width capacitor | Replace for another new one run for hugs | Mário andre |
| PHILCO | PMS25N3 | Does all the functions but doesn't turn on the traffic relay | Transistor q2 smd with the code y11 on top of it I put bc847 in its place and it worked fine | Replace it and that's it | orlando lott |
| PHILCO | PH40E36DSGW | Turning off by itself | Capacitor c111smd near the processor remove problem solved | Robert | |
| PHILCO | PH40E36 | Turning off by itself | Capacitor c111smd near the processor remove problem solved | Robert | |
| PHILCO | PCM1443 | It doesn't turn on, it has 69v and a click in the speaker but it doesn't generate | Replace flyback | DJ PITUKA | |
| PHILCO | PME32 | Microwave turns on, works for 2 seconds and stops (does not turn off) | Electrolytic capacitor 470/25v exhausted | Capacitor replaced | ajm |
| PHILCO | PH24M | Doesn't start | Weak 12v capacitor | Replace the cap, you need to have 12v with 11.8 it doesn't turn on | Matrix |
| PHILCO | PH21US A1 | Dark stripe on the left side | Absence of 0.35 volts on pin 57 of the micro, (afc). horizontal phase. | Replace resistor r487 (12k) | Carlos Alberto (ELETRÔNICA BATURITÉ) |
| PHILCO | PH21M SS | Turns on normally with image but keeps turning off and on sporadically | Judge 02. (2nkhhh1) | Tsound is no point in testing, you have to replace | BETO ELETRONICA ACRELANDIA AC |
| PHILCO | PH21USA1 | Sound keeps failing | Release the collector of transistor q606 | DJ PITUKA | |
| PHILCO | TP-1452N | Power supply does not arm, LED flashes (activating protection) | Fly-back damaged. uses ov2094/d1-c. but I used the ov2094/d1-a, although different, it works the same. | Replace the fly-back remembering to adjust the focus and screen potentiometers at least before turning it on for the first time. | |
| PHILCO | PH32F33DG | Piscando led standby | Update software | Downloading the update from the Philips website means updating. | Naldo Lima |
| PHILCO | PH32 LCD | The red LED turns off, but it doesn't turn on | Electrolytic ec4. 33uf x 25v | Eletrônica Cecé, Brumadinho mg | |
| PHILCO | PH21M SS | It turned on normally with the image from the middle down on the black top | After banging my head a lot I found the d-301 open | Replace and that's it!!! | ELETRÔNICA CAVALCANTE MARTINÓPOLE-CE |
| PHILCO | PH21MSS | LED does not turn on, blinking weakly | D818 or d819 feeding vertical | Swap d818 or d819 | beto2828 |
| PHILCO | PH23F33D | Sound chirping after a few minutes of switching on | Replace capacitor smd c602 | WORLDWIDE | |
| PHILCO | PHT660N | When turning on display, weak power supply varies | Power supply trafo pos tr1 | Masf | |
| PHILCO | PH32U20DSG | A normal image appeared when turning on, after a few seconds the screen changed into different colors, changing like auto.gen and did not accept any commands | Non-processor reballing | eletronica italia |