Philco TV Repair: Common Faults and Solutions.
Search: Philco
Results: 4740
Results: 4740
Philco Repair Guide: Common Issues and Fixes
| Brand | Model | Fault | Detailed Problem | Solution | By |
|---|---|---|---|---|---|
| PHILCO | TPF2140 | Do not turn on a dead power supply. | Diodo d911 | Midiendo diode as good, replace with new one. | javier fernandez |
| PHILCO | PT2054 | Does not turn on or when it does turn off after a while. | Shorted transistor q903 bc 337 | After changing the TV ok. | George Pontes |
| PHILCO | PH32U20DSGW | Turns on normally and turns off after 40 seconds to 1 minute. | Corrupted software due to various causes such as power outage. | Software update solved the problem, get the file on the philco website. | Tom |
| TV PHILCO. | TP1410 | The TV just stays on standby, sometimes it turns on and sometimes it doesn't. | Position resistor r931=15 homs, at the power supply with cold soldering. | Is the solution just to resolder and celebrate? | Armando de Olímpia. |
| PHILCO | 2054 | TV with short when connecting plug | Diodes d901 d902 d903 d904 q902 bt600/ shorted | Replace all mentioned | Leonis |
| PHILCO | PB120N PB120 | Can't read cd | Capacitor e415 | Replace | cimar |
| PHILCO | PH21SS | TV won't come out of standby, won't turn on | Resistor r470 3w aberto | Replace resistor r470 3w and solved | |
| PHILCO | PCA230 | Does not pull the CD and does not light up the display | D56 open | Replace for another or use a 1n4148 | brunopooubel |
| PHILCO | PH 21 US | Does not turn on, power supply capacitor charged | Photo coupler position n504 change | Replace the n504 817b and that's it | Gracielia |
| PHILCO | PH21MSS | This TV arrived at the store with the fly broken, I removed one from a board I had and put it in, but the TV turned on with a reduced picture. | New fly back and solved the problem | Eletrônica Renascer | |
| PHILCO | PB121 BT | On standby - does not turn on | Transistor BD882 open base/collector | Replace the same. | Maastec |
| PHILCO | PCM2044, 2046 | No characters | Zener zd601 shorted or r613 open | Tv without characters and after changing, tda 8361, or vertical ci (which could cause the problem, I came across zener 8v2 (zd601) in parallel with r613. problem solved. | cesar |
| PHILCO | TPF2130 | LED is on but won't turn on | Bad 2408 memory Just change it and it kills all the voltage coming from the power supply so it won't turn on. | ELETRÔNICA SOUZA | |
| PHILCO | PH19C | Só led st by | Diodo d2 pci principal | ||
| PHILCO | PH32 LED A2 | LED goes off but tsound is no image or sound, sometimes it turns on and works indefinitely | When heating the memory with the blower, it worked in several attempts, it seems that when it cooled down it stopped working | Changing the 25q64 memory and ceramic capacitor on pin 8 | davi.sls |
| PHILCO | PH29T21 | Red led stb access. but doesn't call 8817 | Regulator 802 smd short replace without measuring 8817 | Replace u 802 | MARCOS MELO. CEARA |
| PHILCO | PH39F33DSG | Turns on normally for a few moments and turns off the black light, looking like burned out LEDs | Defect on the power supply board u201 viper 17h = l = similar | MACSOM | |
| PHILCO | PH21B | Off, when plugged in, the LED flashes, the power starts to generate and dies, then all you have to do is unload the caps. | Transistor v553 2sc1815 | To replace | gdp2 |
| PHILCO | PH-24M LED | Without audio - 12v voltage, drops to 6.5v | Q3, (fet ao3401 smd) shorted or with changes. | Replace - for a new one preferably. | Severino Silva |
| PHILCO | PH21SS | The LED is blinking, and tsound are no voltages on the power supply's secondary, with only 34 volts on the +b. | 819 diode near shorted transformer | Replace it, in my case it was just him and the TV returned to normal.. | Rafael |